Husqvarna FE 450 2016 Repair Manual page 89

-
Lift the rear frame slightly and position the shock absorber.
-
Mount and tighten screw
Guideline
Screw, top M10
shock absorber
-
Position the rear frame.
-
Mount and tighten screws
Guideline
MB
Screw, sub­
frame
0
-
Remove screws on both sides.
-
Mount and tighten screws
Guideline
MB
Screw, sub­
frame
(FE EU/ AU, FE 450/501 US)
-
Lower the swingarm.
(FE 501 SUS)
-
Lower the swingarm.
-
Position the angle lever and linkage lever.
Mount and tighten fitting (D.
Guideline
Nut, linkage lever on
angle lever
-
Mount and tighten screw @.
Guideline
Screw, bottom
M 1 0
shock absorber
8.
60 Nm (44.3 lbf ft)
®
Loctite
8
on both sides.
35 Nm (25.8 lbf ft)
®
Loctite
0
on both sides.
35 Nm (25.8 lbf ft)
®
Loctite
M14x1 .5 80 Nm (59 lbf ft)
60 Nm (44.3 lbf ft)
®
Loctite
10 EXHAUST
2701
TM
2701 TM
2701 TM
2701
TM
87