Disassembling The Seal Ring Retainer - Husqvarna FE 450 2016 Repair Manual

9.16

Disassembling the seal ring retainer

9 SHOCK ABSORBER, SWINGARM
-
Remove rebound shim stack
Info
Place the rebound shim stack onto a screwdriver and
set it down as a unit.
-
Remove piston
-
Remove compression shim stack
• Info
I
Place the compression shim stack onto a screwdriver
and set it down as a unit.
-
Remove rebound washer (D.
-
Remove seal ring retainer@.
-
Remove locking cap
Preparatory work
-
Remove the spring.
-
Disassemble the damper.
-
Disassemble the piston rod.
Main work
-
Remove spring
-
Remove O-ring
-
Remove rebound rubber
201405-10
8.
C,.
0-
(D
and rubber buffer@).
(a p. 60)
(a p. 61)
(a p. 62)
O.
8.
8.
63