18.5.36
Installing the spark plug
Installing the starter motor
18.5.37
18.5.38
Installing the oil filter
-
Mount and tighten the spark plug using the special tool.
Guideline
Spark plug
I
Spark plug wrench with link (77229172000)
309224-10
-
Grease the O-ring. Position the starter motor.
-
Mount and tighten screws
I
Guideline
Screw, starter motor
-
Tilt the motorcycle to one side and fill the oil filter housing to
about 1/3 full with engine oil.
Insert oil filter
-
Oil the O-ring of the oil filter cover.
-
Mount oil filter cover
-
Mount and tighten screws
Guideline
I
Screw, oil filter cover
M12x1 .25
15 ... 20 Nm (11.1
... 14.8 lbf ft)
O.
I
M6
110 Nm (7.4 lbf ft)
O
into the oil filter housing.
8.
@).
I
M5
I 6 Nm (4.4 lbf ft)
18 ENGINE
..
(�
p. 361)
..
..
247