Changing The Rear Wheel Bearing - Husqvarna FC 250 2016 Repair Manual

14.7.10

Changing the rear wheel bearing

-
Slide new engine sprocket
-
Mount the new chain.
-
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
-
Install the rear wheel. (!ill
-
Have an assistant operate the rear brake.
-
Mount and tighten screw
Guideline
Screw, engine M10
sprocket
-
Position the engine sprocket cover.
Mount and tighten screw
Guideline
Screw, clutch slave
cylinder
-
Mount and tighten screw@.
Guideline
Remaining screws,
chassis
Finishing work
-
Install the air filter box cover.
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the rear wheel.
0
onto the countershaft.
C,.
p. 117)
(D
with washer.
60 Nm (44.3 lbf ft)
®
Loctite
O.
10 Nm (7.4 lbf ft)
M6
MS 25 Nm (18.4 lbf ft)
(!ill p. 90)
(!ill p. 12)
(!ill p. 12)
(a p. 116)
14 WHEELS
2701
TM
125