Removing The Crankshaft; Working On Individual Parts; Work On The Right Section Of The Engine Case - Husqvarna FE 450 2016 Repair Manual

18.3.40

Removing the crankshaft

18.4

Working on individual parts

18.4.1

Work on the right section of the engine case

-
Secure the engine in an upright position.
8.
-
Remove lock ring
-
Pull out both transmission shafts together from the bearing
seats.
Info
Do not lose the washers.
-
Attach the special tool to the crankshaft.
I
Protection cap (75029090000)
O
-
Mount special tool onto the engine case with suitable
screws.
I
Puller (90129048100) (�
-
Press the crankshaft out of the bearing seat.
-
Take out crankshaft .
-
Remove the special tools.
-
Take off the right section of the engine case.
Preparatory work
-
Remove the oil pressure regulator valve.
(� p. 360)
p. 364)
(� p. 201)
18 ENGINE
197