Installing The Shift Rails; Installing The Left Engine Case - Husqvarna FE 450 2016 Repair Manual

18.5.5

Installing the shift rails

18.5.6

Installing the left engine case

O
-
Install shift rails together with upper springs @ and
lower springs.
Info
Fix the springs in the shift rails with grease.
O
-
Mount dowels onto the left section of the engine case.
-
Grease the sealing surfaces. Apply the sealing compound to
the left section of the engine case.
I
Loctite 591 O
®
• Info
I
To prevent sealing compound from entering into the
oil channels, dowels
-
Mount the left engine casing. If necessary, strike it lightly with
a rubber mallet.
Info
Do not use the screws to pull the two sections of the
engine case together.
-
Mount screws @ but do not tighten them yet.
I Guideline I
Screw, engine case
(D
-
Mount screws but do not tighten them yet.
Guideline
I I
Screw, engine case
C,
-
Mount screws but do not tighten them yet.
Guideline
I I
Screw, engine case
-
Mount screw Ci) but do not tighten yet.
Guideline
I I
Screw, engine case
(D
-
Mount screw and tighten all screws in a crisscross pat­
tern.
Guideline
I I
Screw, engine case
O
must be mounted first.
I
M6x40 10 Nm (7.4 lbf ft)
M6x60 110 Nm (7.4 lbf ft)
M6x75 10 Nm (7.4 lbf ft)
M6x80 10 Nm (7.4 lbf ft)
M6x85 10 Nm (7.4 lbf ft)
18 ENGINE
231