Husqvarna FE 450 2016 Repair Manual page 138

14 WHEELS
136
(FE 501 SUS)
Remove fittings (3. Take off the rear sprocket.
Position the new rear sprocket. Mount and tighten the
fittings.
Guideline
Nut, rear M8
sprocket
screw
-
Slide new engine sprocket
Mount the new chain.
-
Connect the chain with connecting link •.
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
Install the rear wheel. (1!1)
Have an assistant operate the rear brake.
Mount and tighten screw
Guideline
Screw, engine M10
sprocket
Position the engine sprocket cover.
Mount and tighten screw
Guideline
Screw, clutch slave
cylinder
Mount and tighten screw fj.
Guideline
Remaining screws,
chassis
Finishing work
Remove the motorcycle from the lift stand.
35 Nm (25.8 lbf ft)
Loctite ®
0
onto the countershaft.
p. 127)
fs)
with the washer.
60 Nm (44.3 lbf ft)
®
Loctite
O.
M6 10 Nm (7.4 lbf ft)
M8 25 Nm (18.4 lbf ft)
(1!1) p. 14)
2701 TM
2701 TM
..