(M) Item And Output Signal For Monitoring - Mitsubishi Electric FR-F800 Series Instruction Manual

5.8
To display the motor speed (the number of
rotations per minute)
To switch the unit of measure to set the
operation speed from frequency to motor
speed
To change the item monitored on the
operation panel and parameter unit
To change the monitor item whose data is
output via terminal FM (CA) or AM
To adjust the output via terminal FM (CA) or
AM
To check the effects of energy saving
To assign functions to the output terminals
To detect the output frequency
To detect the output current
To detect the output torque
To use the remote output function
To use the analog remote output function
To output the fault code via a terminal
To detect the specified output power
To detect the control circuit temperature
5.8.1
The frequency monitored or set on the operation panel can be changed to the motor speed or the machine speed.
Pr.
37
Speed display
M000
505 Speed setting
M001 reference
144 Speed setting
M002 switchover
Downloaded from ManualsNet.com

(M) Item and output signal for monitoring

Purpose
Speed indication and its setting change to
rotations per minute
Initial value
Name
FM
0
60 Hz 50 Hz
4
search engine
Parameter to set
Speed indication and its
setting change to P.M000 to P.M002
rotations per minute
P.M020 to P.M023,
Operation panel monitor
P.M030, P.M031,
item selection
P.M044, P.M045,
Cumulative monitor
P.M050 to P.M052,
value clear
P.M100 to P.M104
P.M040 to P.M042,
Terminal FM (CA)
P.M044, P.M300,
function selection
P.M301, P.D100
P.M310, P.M320,
Terminal FM (CA)/AM
P.M321, P.M330 to
calibration
P.M334
P.M023, P.M100,
Energy saving
P.M200 to P.M207,
monitoring
P.M300, P.M301
P.M400 to P.M406,
Output terminal function P.M410 to P.M416,
assignment P.M420 to P.M422,
P.M431
Up-to-frequency
sensitivity
Output frequency P.M440 to P.M444
detection
Low speed detection
Output current detection P.M433, P.M460 to
Zero current detection P.M464
Output torque detection P.M470
Remote output P.M500 to P.M502
Analog remote output P.M530 to P.M534
Fault code output
P.M510
function
Pulse train output of
P.M520
output power
Control circuit
P.M060
temperature monitoring
Setting range
CA
0
*1
1 to 9998
1 to 590 Hz
0, 2, 4, 6, 8, 10, 12, 102,
104, 106, 108, 110, 112
Pr.37, Pr.144, Pr.505
Pr.52, Pr.170,
Pr.171, Pr.268,
Pr.290, Pr.563,
Pr.564, Pr.774 to
Pr.776, Pr.891,
Pr.992, Pr.1018,
Pr.1106 to Pr.1108
Pr.54, Pr.55, Pr.56,
Pr.158, Pr.290,
Pr.291, Pr.866
Pr.867, Pr.869, C0
(Pr.900), C1
(Pr.901), C8 (Pr.930)
to C11 (Pr.931)
Pr.52, Pr.54, Pr.158,
Pr.891 to Pr.899
Pr.190 to Pr.196,
Pr.289, Pr.313 to
Pr.322
Pr.41 to Pr.43, Pr.50,
Pr.870
Pr.150 to Pr.153,
Pr.166, Pr.167
Pr.864
Pr.495 to Pr.497
Pr.655 to Pr.659
Pr.76
Pr.799
Pr.663
Description
Monitoring and setting of frequency
Set a number for the speed of machine operated at the
speed (frequency) set in Pr.505.
Set the reference speed (frequency) for Pr.37.
Set the number of motor poles for the indication of the
motor speed.
5.8 (M) Item and output signal for monitoring
1
2
Refer to
page
3
303
4
305
5
314
6
319
7
324
8
330
9
337
10
339
341
341
343
345
346
347
303
5. PARAMETERS