Mitsubishi Electric FR-F800 Series Instruction Manual page 693

REVISIONS
*The manual number is given on the bottom left of the back cover.
Revision date
Jul. 2014
Aug. 2015
Mar. 2018
Feb. 2019
Apr. 2020
Nov. 2021
692
IB-0600547ENG-F
Downloaded from ManualsNet.com
*
Manual number
IB(NA)-0600547ENG-A First edition
IB(NA)-0600547ENG-B Added
• Setting values "7, 14, and 17" of Pr.554 PID signal operation selection
• PID control enhanced functions (Pr.111, Pr.1361 to Pr.1381)
• Pr.1018 Monitor with sign selection
• MM-EFS (3000 r/min specification)
• Speed detection signal (FB, FB2)
IB(NA)-0600547ENG-C Added
• Start count monitor (Pr.1410, Pr.1411)
• Excitation current low-speed scaling factor (Pr.14 = "12 to 15", Pr.85, Pr.86, Pr.565, Pr.566, Pr.617)
• Backup/restore function
• Input signals (JOGF, JOGR)
• Output signal (SAFE)
• MODBUS RTU communication stop bit length selection
• Continuous operation at communication error (Pr.502 = "4")
• PID manipulated amount: 0 to 100% (Pr.1015 = "2, 12")
• Motor induced voltage constant (Pr.1412, Pr.1413)
• Undervoltage level setting of the 200 V class inverters (Pr.598)
• User parameter auto storage function (Pr.675)
• User parameter read source selection (Pr.414 = "11, 12")
• Reset selection (Pr.75 = "1000 to 1003, 1014 to 1017, 1100 to 1103, 1114 to 1117")
• Direct setting selection (Pr.1000)
• IP55 compatible model
• Compatibility with the FR-A8NF and FR-A8NL
IB(NA)-0600547ENG-D Added
• Setting values "1000 to 1003, 1010 to 1013" of Pr.162 Automatic restart after instantaneous
power failure selection
• Setting values "109 and 110" of Pr.800 Control method selection
• Setting value "1" of Pr.1018 Monitor with sign selection
• N010 Communication reset selection
• N240 Ready bit status selection
IB(NA)-0600547ENG-E Added
• Setting value "11" of Pr.259 Main circuit capacitor life measuring
• Pr.506 Display estimated main circuit capacitor residual life
• Setting values "11 to 14, 21 to 24" of Pr.573 4 mA input check selection
• RLF signal and RLR signal
• Input terminal monitor (for terminals S1 and S2)
• Reset selection after inverter faults are cleared (with the HMS network option installed)
• Compliance with the latest BACnet standard
IB(NA)-0600547ENG-F Added
• Cooling fan operation selection during the test operation (Pr.244 = "1000, 1001, 1101 to 1105")
• Display/reset ABC relay contact life (Pr.507, Pr.508)
• DriveControl writing restriction selection (Pr.349 = "10000, 10001, 10100, 10101, 11000, 11001,
11100, 11101")
• Pr.1346 PID lower limit operation detection time
• Pr.890 Internal storage device status indication
• Internal storage device fault (E.PE6)
search engine
Revision