Mitsubishi Electric FR-F800 Series Instruction Manual page 36

 Reinstallation of the front covers (FR-F820-01870(45K) or higher, FR-
F840-00930(45K) or higher)
(a)
(a) Clip on the upper front cover as illustrated.
Securely install the cover to the inverter by fixing the hooks on the sides of the cover into place.
(b) Tighten the screws on the lower part of the cover.
(c) Attach the lower front cover using the screws.
NOTE
• Fully make sure that the front cover has been reinstalled securely. Always tighten the installation screws of the front cover.
Downloaded from ManualsNet.com
(b)
search engine
(c)
Tighten Tighten Tighten
2.2 Removal and reinstallation of the operation panel or the front covers
Tighten Tighten Tighten
2. INSTALLATION AND WIRING
1
2
3
4
5
6
7
8
9
10
35