Mitsubishi Electric FR-F800 Series Instruction Manual page 366

 Display unit changing for analog input (Pr.241)
• The analog input display unit (%/V/mA) can be changed for analog input bias/gain calibration.
• Depending on the terminal input specification setting of Pr.73 (Pr.267), the unit of the displayed value of C17 (Pr.919), C19
(Pr.920), C39 (Pr.932), and C41 (Pr.933) changes as follows:
Analog command (via terminal 1 or 4)
(depending on the setting of Pr.73
0 to 5 V input
0 to 10 V input
0 to 20 mA input
Downloaded from ManualsNet.com
(Pr.267))
0% to 100% (0.1%)
0% to 100% (0.1%)
0% to 100% (0.1%)
search engine
Pr.241 = 0 (initial value) Pr.241 = 1
0 to 5 V (0.01 V)
0 to 10 V (0.01 V)
0 to 20 mA (0.01 mA)
5. PARAMETERS
5.9 (T) Multi-function input terminal parameters
1
2
3
4
5
6
7
8
9
10
365