Mitsubishi Electric FR-F800 Series Instruction Manual page 238

• When the remotely-set frequency is cleared by turning ON the RL (clear) signal after turning OFF (ON) both the RH and RM
signals, the inverter operates at the frequency in the remotely-set frequency cleared state if power is reapplied before one
minute has elapsed since turning OFF (ON) both the RH and RM signals.
CAUTION
• When using the remote setting function, set the maximum frequency again according to the machine.
Parameters referred to
Pr.1 Maximum frequency, Pr.18 High speed maximum
Pr.7 Acceleration time, Pr.8 Deceleration time, Pr.44 Second acceleration/deceleration time, Pr.45 Second deceleration
Pr.28 Multi-speed input compensation
Pr.178 to Pr.189 (Input terminal function
Downloaded from ManualsNet.com
Remotely-set frequency stored last time
Acceleration (RH)
Deceleration (RM) OFF
Clear (RL)
Forward rotation (STF)
Power supply
frequencypage 287
selectionpage 263
selection)page 373
search engine
One minute
More than
one minute
Operation is performed at the set
frequency 0Hz.
ON
ON
ON ON
ON ON
5.5 (F) Setting of acceleration/deceleration time and acceleration/deceleration pattern
Time
timepage 228
1
2
3
4
5
6
7
8
9
10
237
5. PARAMETERS