HYOSUNG TE 450 Service Manual page 54

● Remove the cylinder head base bolts, and then
remove the cylinder head.
NOTE
If the cylinder head does not come off easily,
lightly tap it using a plastic hammer.
● Remove the cylinder head gasket ①
pins ② .
● Remove the cam chain guide ③ .
● Remove the cylinder base nuts ④ , and then
remove the cylinder.
NOTE
If the cylinder does not come off easily, lightly tap
it using a plastic hammer.
● Remove the cylinder gasket ⑤
and dowel
and dowel pins ⑥ .
②
③
④
ENGINE 3-12
①
⑤
⑥