7-19 CHASSIS
◉ ◉ MASTER CYLINDER DISAS-
SEMBLY
● Drain brake fluid out of the master cylinder.
● Disconnect the brake lamp switch lead wire cou-
pler.
● Remove the union bolt ① .
CAUTION
Place a rag under the union bolt so that brake
fluid can not contact the parts.
● Remove the two mounting bolts and take off the
master cylinder.
● Remove the two fitting screws and separate the
cap and diaphragm.
● Detach the dust seal boot ②
clip.
● Pull out the piston/cup set ③
and remove the cir-
and spring ④ .
②
③
①
④