Table of Contents
Advertisement
◉ ◉ MASTER CYLINDER INSPECTION
Inspect the master cylinder bore for any scratches or
other damage.
Inspect the piston surface for any scratches or other
damage.
◉ ◉ MASTER CYLINDER REASSE-
MBLY AND REMOUNTING
Reassemble and remount the master cylinder in the
reverse order of removal and disassembly.
Pay attention to the following points :
CAUTION
� � Wash the master cylinder components with
new brake fluid before reassembly.
� � When washing the components, use the speci-
fied brake fluid. Never use different types of
fluid or cleaning solvents such as gasoline,
kerosine, etc.
Brake fluid specification and classification
NOTE
When installing the circlip, make sure that the
sharp edge of the circlip faces outside.
● When remounting the master cylinder to the han-
dlebar, first tighten the mounting bolts for upside
as shown.
Front brake master cylinder mounting bolt
: 5~8 N∙ ∙ m (0.5~0.8 kgf∙ ∙ m)
● Tighten the brake hose union bolt ①
fied torque.
Brake hose union bolt
: 40~60 N∙ ∙ m (4.0~6.0 kgf∙ ∙ m)
WARNING
Bleed air from the brake fluid circuit after
assembling master cylinder. (Refer to page 2-17)
: DOT 4
to the speci-
Master Cylinder
Up
Handlebar
Clearance
CHASSIS 7-20
①
Hide quick links:
Advertisement
Table of Contents
