Brakes - HYOSUNG TE 450 Service Manual

Hide thumbs Also See for TE 450:
Table of Contents

Advertisement

● If not adjust by the adjuster �, loosen the clutch
cable adjuster lock nut �.
● Turn the clutch cable adjuster � in or out to pro-
vide the specified play.
● After adjustment, tighten the lock nut �.
● The clutch cable should be lubricated with a light
weight oil whenever it is adjusted.
Clutch cable play � �

BRAKES

Inspect Interval
Inspect Initially at 1 month and Every 3 months
thereafter.
▣ ▣ BRAKE PADS
● Remove the front and rear wheels.
(Refer to page 7-8)
The extent of brake pad wear can be checked by
observing the limit line ①
When the wear reaches the limit line, replace the
pads with new ones. (Refer to page 7-14 and 7-42)
CAUTION
Replace the brake pads as a set, otherwise brak-
ing performance will be adversely affected.
▣ ▣ REAR BRAKE PEDAL
The procedure for adjusting the rear brake pedal is
as follows :
10 ~ 15 mm (0.4 ~ 0.6 in)
on the side of brake pads.
PERIODIC MAINTENANCE 2-14
FRONT BRAKE
REAR BRAKE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents