HYOSUNG TE 450 Service Manual page 218

7-65 CHASSIS
◉ ◉ REMOUNTING
Remount the cushion lever, cushion rod and
swingarm in reverse order of removal.
Pay attention to the following points :
● Install the swingarm and pivot shaft.
● Tighten the swingarm pivot nut to the specified
torque.
Swingarm pivot nut
: 50~80 N∙ ∙ m (5.0~8.0 kgf∙ ∙ m)
● Install the rear shock absorber and cushion lever.
● Tighten the rear shock absorber mounting nuts to
the specified torque.
Rear shock absorber nut (Upper) ① ①
: 40~60 N∙ ∙ m (4.0~6.0 kgf∙ ∙ m)
Rear shock absorber nut (Lower) ② ②
: 40~60 N∙ ∙ m (4.0~6.0 kgf∙ ∙ m)
● Tighten the cushion rod nut and cushion lever nut
to the specified torque.
Cushion lever nut ③ ③
: 70~100 N∙ ∙ m (7.0~10.0 kgf∙ ∙ m)
Cushion rod nut ④ ④
: 70~100 N∙ ∙ m (7.0~10.0 kgf∙ ∙ m)
①
④
②
③