Suspensions; Chassis Bolts And Nuts - HYOSUNG TE 450 Service Manual

2-23 PERIODIC MAINTENANCE

SUSPENSIONS

Inspect Interval
Inspect Every 6 months.
● Support the vehicle with a jack or wooden blocks.
● Remove the front and rear wheels.
(Refer to page 7-8)
● Inspect the suspension arm, bearing and bushing
for scratches, wear, or damage.
If any damages are found, replace the suspension
arm, bearing or bushing with a new one.
(Refer to page 7-24~25)
● Inspect the swingarm, rear axle and bearing for
scratches, wear or damage.
If any damages are found, replace them with a
new one. (Refer to page 7-63 and 7-69)
● Inspect the front and rear shock absorbers for oil
leakage or damage.
If any damages are found, replace them with a
new one. (Refer to page 7-24 and 7-55)

CHASSIS BOLTS AND NUTS

Inspect Interval
Tighten Initially at 1 month and Every 3 months
thereafter.
Check that all chassis nuts and bolts are tightened to
their specified torque. (Refer to page 8-13)