Table of Contents
Advertisement
◉ ◉ BRAKE CALIPER REASSEM-
BLY AND REMOUNTING
☞ Refer to page 7-17
Reassemble and remount the brake caliper in the
reverse order of removal and disassembly.
Pay attention to the following points :
▣ ▣ PISTON SEALS
● Install the piston seal ①
▣ ▣ BRAKE CALIPER HOLDER
● Tighten the holder pin ③
to the specified torque.
Rear brake caliper holder pin
● Apply SILICONE GREASE to the brake caliper
holder pin ③
and caliper pin bolt ⑤ .
SILICONE GREASE
● Tighten the brake caliper pin bolt ⑤
fied torque.
Rear brake caliper pin bolt
● Install the pad spring and pads.
(Refer to page 7-42)
and dust seal ② .
to the caliper holder ④
: 18 N∙ ∙ m (1.8 kgf∙ ∙ m)
to the speci-
: 23 N∙ ∙ m (2.3 kgf∙ ∙ m)
②
①
④
CHASSIS 7-46
③
⑤
Hide quick links:
Advertisement
Table of Contents
