HYOSUNG TE 450 Service Manual page 216

7-63 CHASSIS
▣ ▣ SWINGARM BEARING AND BUSHING
Insert the spacer ① into the bearing ② , bushing ③
and then check the play when moving the spacer up
and down.
If excessive play is noted, replace the bearing and
bushing with a new one.
▣ ▣ CUSHION LEVER BEARING AND
CUSHION ROD BEARING
Insert the spacer into the bearing, and then check the
play when moving the spacer up and down.
If excessive play is neted, replace the bearing with a
new one.
▣ ▣ SWINGARM PIVOT SHAFT
Using a dial gauge, check the pivot shaft runout.
If the runout exceeds service limit, replace the pivot
shaft with a new one.
Swingarm pivot shaft
runout
Dial gauge : 09900-20606
Magnetic stand : 09900-20701
V-block : 09900-21304
Service limit
0.6 mm (0.024 in)
②
①
①
①
③
②