7-9 CHASSIS
▣ ▣ REAR WHEEL HUB
● Remove the rear wheel.
● Remove the cotter pin and loosen the wheel hub
nut by applying the rear brake.
● Remove the wheel hub nut and washer.
● Remove the rear wheel hub ① .
①
◉ ◉ INSPECTION AND DISASSEMBLY
▣ ▣ DUST SEAL
Inspect the dust seal lips for wear or damage.
If any damages are found, replace the dust seal with
a new one.
②
● Remove the spacer ② .
③
● Remove the dust seal ③
with the special tool.
Oil seal remover : 09913-50121
CAUTION
Replace the removed dust seal with a new one.
▣ ▣ HUB BEARINGS
play
play
Inspect the inner race play of the hub bearing by
hand while it is in the wheel hub.
Rotate the inner race by hand to inspect for abnormal
noise and smooth rotation. If there is anything unusu-
al, replace the bearing with a new one.