Table of Contents
Advertisement
7-25 CHASSIS
▣ ▣ SUSPENSION ARM PIVOT BEARING
Inspect the dust seal lips and spacers for wear and
damage. If any damages are found, replace them
with new ones.
Inspect the bearings for play. If excessive play is
found, replace them with a new one.
▣ ▣ BRAKE DISK COVER
Inspect the brake disk cover for damage. If any dam-
ages are found, replace the brake disk cover with a
new one.
◉ ◉
FRONT SHOCK ABSORBER DISPOSAL
WARNING
� � The front shock absorber unit contains high-
pressure nitrogen gas.
� � Mishandling can cause explosion.
� � Keep away from fire and heat. High gas pres-
sure caused by heat can cause an explosion.
� � Release gas pressure before disposing.
▣ ▣ GAS PRESSURE RELEASE
● Remove the valve cap.
● Press the valve with a screwdriver to bleed out the
nitrogen gas.
WARNING
� � Releasing high pressure gas from the front
shock absorber unit can be hazardous. Never
perform any servicing until the nitrogen gas
pressure has been released from the front
shock absorber unit.
� � When releasing the gas pressure, place a rag
over the gas valve and use the tip of a screw-
driver to press the valve. Do not use your fin-
ger to depress the gas valve, and be sure to
direct the valve away from your face and body.
� � Be sure to always wear eye protection when
performing this procedure.
Hide quick links:
Advertisement
Table of Contents
