HYOSUNG TE 450 Service Manual page 121

5-7 COOLING SYSTEM
◉ ◉ INSTALLATION
Install the cooling fan thermo-switch in the reverse
order of removal.
Pay attention to the following points :
● Install a new O-ring ①
to the O-ring.
● Tighten the cooling fan thermo-switch to the speci-
fied torque.
Cooling fan thermo-switch
● Pour engine coolant. (Refer to page 2-12)
● Bleed air from the cooling circuit.
(Refer to page 2-12)
● Install the front fender.
and apply engine coolant
: 13 N∙ ∙ m (1.3 kgf∙ ∙ m)
①