HYOSUNG TE 450 Service Manual page 181

NOTE
When installing the tie rod end, install the washer
① ① between the nut ② ②
◉ ◉ FRONT SUSPENSION SETTING
▣ ▣ SPRING PRE-LOAD ADJUSTMENT
The front suspension spring pre-load is adjustable.
This adjustment is performed by changing spring set
length.
FRONT SUSPENSION SPRING SET LENGTH
MAXIMUM
STANDARD
(SOFTEST)
270 mm (10.6 in) 280 mm (11.0 in)
CAUTION
Do not set the spring length out of the specified
range.
● Remove the front shock absorber.
(Refer to page 7-23)
● Loosen the lock nut ① .
● Adjust the spring set length by turning the adjuster
② .
● Tighten the lock nut ① .
● Remount the front shock absorber.
(Refer to page 7-27)
and steering knuckle ③ ③ .
MINIMUM
(STIFFEST)
258 mm (10.2 in)
② ① ③
CHASSIS 7-28
①
②