2-3 PERIODIC MAINTENANCE
MAINTENANCE PROCE-
DURES
This section describes the servicing procedures for
each item mentioned in the Periodic Maintenance
chart.
AIR CLEANER
Inspect Interval
Clean Every 3 months.
If the air cleaner is clogged with dust, intake resis-
tance will be increased, with a resultant decrease in
power output and an increase in fuel consumption.
Check and clean the air cleaner element in the fol-
lowing manner :
● Remove the seat. (Refer to page 7-3)
● Remove the air cleaner case cover ① .
● Remove the air cleaner element ② .
● Separate the polyurethane foam element ③ , ele-
ment frame ④
and element trap stopper ⑤ .
● Fill a wash pan of a proper size with a non-
flammable cleaning solvent �. Immerse the air
cleaner element in the cleaning solvent and wash
it.
● Press the air cleaner element between the palms
of both hands to remove the excess solvent : do
not twist or wring the element or it will tear.
● Immerse the element in HYOSUNG genuine oil
�, and then squeeze out the excess oil leaving
the element slightly wet.
③
④
①
②
⑤