▣ ▣ STEERING SHAFT AND TIE ROD
● Drain engine oil and coolant.
(Refer to page 2-10 and 2-12)
● Remove the radiator assembly ① .
(Refer to page 5-2)
● Disconnect the oil hoses ②
● Remove the oil tank ④ . (Refer to page 5-17~18)
● Remove the cotter pins and tie rod end nuts.
CAUTION
Replace the removed cotter pins with new ones.
● Remove the tie rods.
and overflow hose ③ .
③
②
①
CHASSIS 7-32
②
④