● Apply SUPER GREASE "A" to the spline of the
axle shaft.
SUPER GREASE "A"
● Install the sprocket flange ①
● Apply BOND "1215" to the axle shaft.
BOND "1215"
● Apply THREAD LOCK "1324" to the thread portion
of the rear axle shaft.
THREAD LOCK " " 1324" "
● Tighten the inner axle shaft inner nut ②
specified torque.
Axle shaft nut (inner)
: 120~150 N∙ ∙ m (12.0~15.0 kgf∙ ∙ m)
● Apply THREAD LOCK "1324" to the thread portion
of the rear axle shaft.
THREAD LOCK " " 1324" "
● Tighten the rear axle outer nut ③
torque.
Axle shaft nut (outer)
: 120~150 N∙ ∙ m (12.0~15.0 kgf∙ ∙ m)
to the axle shaft.
to the
to the specified
②
③
CHASSIS 7-72
①