Table of Contents
Advertisement
7-71 CHASSIS
● Install the axle housing from the swingarm's right
side.
● Install the rear axle shaft ① .
● Install the chain adjuster bolt ② .
● Install the chain adjuster ③ .
● Tighten the axle housing bolts, nuts and wrench
bolts temporarily.
▣ ▣ REAR AXLE SHAFT
When the rear axle shaft is replaced with a new one,
install the right axle nut onto the new axle shaft.
● Apply THREAD LOCK "1324" to the axle shaft.
THREAD LOCK " " 1324" "
● Install the brake disk to the rear axle shaft.
● Apply THREAD LOCK "1324" to the disk bolts and
tighten them to the specified torque.
THREAD LOCK " " 1324" "
Disk bolt : 18~28 N∙ ∙ m (1.8~2.8 kgf∙ ∙ m)
NOTE
Make sure that the brake disk is clean and free of
any grease matter.
● Install the rear axle shaft into the axle shaft housing.
①
③
②
Hide quick links:
Advertisement
Table of Contents
