Table of Contents
Advertisement
◉ ◉ STARTER MOTOR REMOVAL
AND DISASSEMBLY
● Disconnect the starter motor lead wire.
● With loosening the bolts ① , remove the starter
motor.
● Remove the starter motor.
◉ ◉ STARTER MOTOR INSPEC-
TION
▣ ▣ CARBON BRUSH
Inspect the carbon brush for abnormal wear, crack or
smoothness in the brush holder.
If any damage are found, replace the brush assembly
with a new one.
▣ ▣ COMMUTATOR
Inspect discoloration, abnormal wear or undercut �
of the commutator.
If the commutator is abnormally worn, replace the
armature with a new one.
When surface is discolored, polish it with #400 sand
paper and clean it with dry cloth.
▣ ▣ ARMATURE COIL INSPECTION
Check continuity between each segment.
Check continuity between each segment and the
armature shaft.
If there is no continuity between the segments or
there is continuity between the segment and shaft,
replace the starter motor with a new one.
Pocket tester : 09900-25002
ELECTRICAL SYSTEM 6-10
①
Segment
�
Hide quick links:
Advertisement
Table of Contents
