HYOSUNG TE 450 Service Manual page 180

7-27 CHASSIS
● Tighten the suspension arm pivot nuts to the
specified torque.
Suspension arm pivot nut
: 40~60 N∙ ∙ m (4.0~6.0 kgf∙ ∙ m)
● Install the front grip and the front shock absorber.
● Apply THREAD LOCK "1324" to the front shock
absorber mounting bolts.
THREAD LOCK " " 1324" "
● Tighten the shock absorber mounting nut to the
specified torque.
Shock absorber mounting nut
(Upper and Lower)
: 40~60 N∙ ∙ m (4.0~6.0 kgf∙ ∙ m)
● Apply THREAD LOCK "1324" to the disk cover
mounting bolts, and then tighten the bolts.
THREAD LOCK " " 1324" "
● Tighten the tie rod end nut to the specified torque.
Tie rod end nut
: 22~35 N∙ ∙ m (2.2~3.5 kgf∙ ∙ m)
● Install the cotter pin.
CAUTION
Replace the removed cotter pin with a new one.