7-45 CHASSIS
● Loosen the caliper pin bolt ① , and then remove
the caliper holder ② .
● Remove the caliper pin bolt ① .
● Place a rag over the brake caliper piston ③
vent the piston from popping out.
● Force out the piston by pushing the piston hanger
pin.
● Remove the dust seal ④
CAUTION
Do not reuse the dust seal and piston seal to pre-
vent leakage of brake fluid.
◉ ◉ BRAKE CALIPER INSPECTION
☞ Refer to page 7-16
▣ ▣ PARKING BRAKE
Inspect the parking brake for any damages and
smooth rotation by turning the axle. If there is any-
thing unusual, replace the parking brake with a new
one.
to pre-
and piston seal ⑤ .
②
①
③
④
⑤