HYOSUNG TE 450 Service Manual page 164

7-11 CHASSIS
● Install the front disk to the front wheel hub.
(Refer to page 7-18)
● Apply SUPER GREASE "A" to the front axle.
SUPER GREASE "A"
● Install the wheel hub.
● Install the front brake caliper. (Refer to page 7-17)
● Tighten the front wheel hub nut to the specified
torque.
Front wheel hub nut
● Install the hub plate ① .
● Install the cotter pin into the front axle.
● Install the front wheel.
CAUTION
Replace the removed cotter pin with a new one.
▣ ▣ REAR WHEEL HUB
● Apply small amount of SUPER GREASE "A" to
the wheel hub's spline.
SUPER GREASE "A"
● Install the rear wheel hub ② , washer and nut.
● Tighten the rear wheel hub nut to the specified
torque.
Rear wheel hub nut
● Install the cotter pin into the rear axle.
● Install the rear wheel.
CAUTION
Replace the removed cotter pin with a new one.
: 55 N∙ ∙ m (5.5 kgf∙ ∙ m)
: 100 N∙ ∙ m (10.0 kgf∙ ∙ m)
②
①