Table of Contents
Advertisement
7-39 CHASSIS
● Install the speedometer ① .
● Install the handle switch box with the lug ②
switch half inserted into the hole ③
bar.
NOTE
When installing the handlebar, make sure that the
cable, wiring harness and brake hose routing are
proper. (Refer to page 8-26 to 31)
● Install the clutch lever assembly to the handlebar
with the mating surface of clutch lever holder
aligned with punch mark ④
● Connect the clutch cable, rear brake cable and
clutch switch.
● Adjust each cable play.
(Refer to page 2-9, 2-13 and 2-15)
● Install the throttle case to the handlebar with the
mating surface of throttle case aligned with the
punch mark ⑤ .
● Tighten the throttle case bolts to the specified
torque.
Throttle case bolt : 5 N∙ ∙ m (0.5 kgf∙ ∙ m)
● Install the brake master cylinder.
(Refer to page 7-20)
on the
on the handle-
on the handlebar.
①
③
②
④
⑤
Hide quick links:
Advertisement
Table of Contents
