Water Pump - HYOSUNG TE 450 Service Manual

Hide thumbs Also See for TE 450:
Table of Contents

Advertisement

5-11 COOLING SYSTEM

WATER PUMP

◉ ◉ REMOVAL AND DISASSEMBLY
● Drain engine coolant. (Refer to page 2-12)
● Drain engine oil. (Refer to page 2-10)
WARNING
� � Do not open the radiator cap when the engine
is hot, as you may be injured by escaping hot
liquid or vapor.
� � The engine must be harmful if swallowed or if it
comes in contact with the skin or eyes.
If engine coolant gets into the eyes or contacts
the skin, flush the eyes or wash the skin thor-
oughly, with plenty of water. If engine coolant
is swallowed, induce vomiting and call a physi-
cian immediately.
● Disconnect the water hoses.
● Disconnect the rear brake switch spring and rear
brake pedal spring as to lower side.
● Remove the rear brake master cylinder mounting
bolts.
● Remove the clutch cover with pushing down the
rear brake pedal.
NOTE
Before draining engine oil and engine coolant,
inspect engine oil and coolant leakage between
the water pump and clutch cover.
If engine oil is leaking, visually inspect the oil seal
and O-ring. If engine coolant is leaking, visually
inspect the O-ring.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents