HYOSUNG TE 450 Service Manual page 210

7-57 CHASSIS
◉ ◉ REAR SUSPENSION SETTING
▣ ▣ SPRING PRE-LOAD ADJUSTMENT
The rear suspension spring pre-load is adjustable.
This adjustment is performed by changing spring set
length.
REAR SUSPENSION SPRING SET LENGTH
MAXIMUM
STANDARD
(SOFTEST)
228 mm
(8.98 in ) ( 9.25 in )
CAUTION
Do not set the spring length out of the specified
range.
● Remove the rear shock absorber.
(Refer to page 7-54)
● Loosen the lock nut ① .
● Adjust the spring set length by turning the adjuster
② .
● Tighten the lock nut ① .
● Remount the rear shock absorber.
(Refer to page 7-56)
MINIMUM
(STIFFEST)
235 mm 213 mm
( 8.39 in )
①
②