HYOSUNG TE 450 Service Manual page 226

7-73 CHASSIS
● Install the rear wheel hubs. (Refer to page 7-11)
● Install the rear wheels. (Refer to page 7-12)
● Adjust the chain slack. (Refer to page 2-21)
● Tighten the rear axle housing nuts and wrench
bolts to the specified torque in the described
order. (Refer to page 2-21)
Rear axle housing nut ① ①
: 70~100 N∙ ∙ m (7.0~10.0 kgf∙ ∙ m)
Rear axle housing wrench bolt ② ②
: 40~60 N∙ ∙ m (4.0~6.0 kgf∙ ∙ m)
● Install the rear caliper and tighten the caliper
mounting bolts to the specified torque.
Rear caliper mounting bolt
: 18~28 N∙ ∙ m (1.8~2.8 kgf∙ ∙ m)
①
①
②
②