Communication Via Profinet Io; Activating Online Operation: Starter Via Profinet Io - Siemens SINAMICS G150 Operating Instructions Manual

Operation

6.9 Communication via PROFINET IO

6.9 Communication via PROFINET IO
6.9.1

Activating online operation: STARTER via PROFINET IO

Description
Online operation with PROFINET IO is implemented using TCP/IP.
Prerequisites
● STARTER Version 4.2 or higher
● Control unit CU320-2 PN or CBE20
STARTER via PROFINET IO (example)
Figure 6-40
Procedure, establishing online operation with PROFINET
1. Set the IP address in Windows XP
2. Settings in STARTER
3. Assigning the IP address and the name
4. Select online operation in STARTER.
344
STARTER via PROFINET (example)
The PC/PG is referred here to a fixed, free IP address.
The PROFINET interface must be "baptized" so that the STARTER can establish
communication.
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A