Lenovo System x3850 X6 Installation And Service Manual page 42

The following is an illustration of the LCD system information display panel menu options flow:
System System
Errors
VPD FW Levels
Error 1
UEFI
MTM #
Primary Level
Serial #
Error 2
UEFI
UUID
Backup Level
String
Error 3
IMM Primary
Error n
Level
IMM Backup
Level
pDSA Code
The following is an example of the information that you will see on the display panel. This example shows the
layout of the information in the main menu when the debug feature is enabled.
System name
Lenovo x3850 X6
System status
System status
When you navigate through the hierarchy of the menu options on the LCD system information display panel,
the display panel shows the information for that option and the up and down arrows appear on the side of
the display panel. When you get to the bottom of the hierarchy of the menu options, only the up arrow will be
available. When you are at the top of the hierarchy of the menu options, only the down arrow will be available.
For the errors submenu set, if only one error occurs, the LCD display panel will display that error. If more than
one error occurs, the LCD display panel displays the number of errors that have occurred. If no errors occur,
the no error menu will be available for navigation.
To move within the menu options, use the Scroll up or Scroll down buttons, then the Select button to enter a
submenu set.
28
System x3850 X6 and x3950 X6 Installation and Service Guide
Scroll Up Button
Select Button
Scroll Down Button
IMM System
Network Info. Environmental
IMM Hostname
Ambient Temp
IMM Ext MAC
CPU1...CPU4
or IMM
Temps
Shared MAC
AC Input Voltage
IP Add.
Estimated Power
DNS Primary
Consumption
DNS Secondary
DNS Tertiary
Subnet
Gateway
IPV6 Add.
Network icon
Check-mark
above 2 indicates
system is booting from
alternative UEFI bank.
Actions
System
reset
This shows a system
supporting four
Ethernet ports.
If the numbers are
flashing, the ports
are active
UEFI\POST code