Lenovo System x3850 X6 Installation And Service Manual page 315

Hide thumbs Also See for System x3850 X6:

Table of Contents

power supply

Power supply

5. Slide the power supply spacer into the bay until it snaps into place on the tabs that are on the side of the

6. Grasp the handle on the rear of the power supply and slide the power supply forward into the power-

supply bay until it clicks. Make sure that the power supply connects firmly into the power-supply

7. Route the power cord through the hook-and-loop strap so that it does not accidentally become

disconnected.

8. Turn on the circuit breaker(s) for the dc power supplies.

9. Reconnect any external cables that you disconnected.

10. Turn on the server and the peripheral devices.

11. Make sure that the server starts correctly and recognizes the newly installed device, and make sure that

no error LEDs are lit.

Removing and replacing components

Troubleshooting

System x3950 x6 6241