Lenovo System x3850 X6 Installation And Service Manual page 765

SNMP Trap ID
5
CIM Information
Prefix: PLAT ID: 0164
User Response
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
Related links
– Removing 2.5-inch and 1.8-inch hot-swap drives
– Replacing 2.5-inch and 1.8-inch hot-swap drives
• 806f010d-0401ffff : The [NumericSensorElementName] has been disabled due to a detected fault.
The drive 1 has been disabled (defunct) due to a fault detected by the controller.
May also be shown as 806f010d0401ffff or 0x806f010d0401ffff
Severity
Error
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Critical - Hard Disk drive
SNMP Trap ID
5
CIM Information
Prefix: PLAT ID: 0164
User Response
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
Related links
– Removing 2.5-inch and 1.8-inch hot-swap drives
– Replacing 2.5-inch and 1.8-inch hot-swap drives
• 806f010d-0402ffff : The [NumericSensorElementName] has been disabled due to a detected fault.
The drive 2 has been disabled (defunct) due to a fault detected by the controller.
May also be shown as 806f010d0402ffff or 0x806f010d0402ffff
Severity
Error
Serviceable
Yes
Automatically notify support
Appendix C. Integrated management module II (IMM2) error messages
751