Lenovo System x3850 X6 Installation And Service Manual page 695

Yes
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0764
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
Related links
– Finding the UEFI (POST) error code
• 806f000f-22010aff : The System [ComputerSystemElementName] encountered firmware error - no
video device detected.
IMM has reported that System Firmware Error No video device detected (ABR Status, Firmware Error, Sys
Boot Status, X8 PCIe1 Firm, X8 PCIe2 Firm) has occurred.
May also be shown as 806f000f22010aff or 0x806f000f22010aff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0766
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
Related links
– Finding the UEFI (POST) error code
• 806f000f-22010bff : Firmware BIOS (ROM) corruption was detected on system
[ComputerSystemElementName] during POST.
Firmware BIOS (ROM) corruption was detected (ABR Status, Firmware Error, Sys Boot Status, X8 PCIe1
Firm, X8 PCIe2 Firm) on the system during POST.
May also be shown as 806f000f22010bff or 0x806f000f22010bff
Severity
Error
Appendix C. Integrated management module II (IMM2) error messages
681