Lenovo System x3850 X6 Installation And Service Manual page 589

Alert Category
Warning - Temperature
SNMP Trap ID
12
CIM Information
Prefix: PLAT ID: 0520
User Response
1. Check the IMM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the Compute Book are not obstructed.
3. Make sure that the room temperature is within operating specifications.
Related links
– Server features and specifications
• 80070101-0b01ffff : Sensor [SensorElementName] has transitioned from normal to non-critical
state.
PCI 1 temperature has risen above the critical level, causing a hard shutdown of the node.
May also be shown as 800701010b01ffff or 0x800701010b01ffff
Severity
Warning
Serviceable
Yes
Automatically notify support
No
Alert Category
Warning - Temperature
SNMP Trap ID
12
CIM Information
Prefix: PLAT ID: 0520
User Response
Complete the following steps:
1. Check the IMM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are
in place and correctly installed.
3. Make sure that the room temperature is within operating specifications.
Related links
– Server features and specifications
• 80070101-0b02ffff : Sensor [SensorElementName] has transitioned from normal to non-critical
state.
PCI 2 temperature has risen above the critical level, causing a hard shutdown of the node.
May also be shown as 800701010b02ffff or 0x800701010b02ffff
Severity
Warning
Appendix C. Integrated management module II (IMM2) error messages
575