Lenovo System x3850 X6 Installation And Service Manual page 309

Fan-pack
Handle
Step 6. Rotate the cam handle all the way up and push it into the server until it locks in place.
Step 7. Reconnect the power cord and any cables that you removed.
Step 8. Turn on the peripheral devices and the server.
Removing a 750-watt -48 volt to -60 volt dc power supply
This topic provides instructions about how to remove a 750-watt -48 volt to -60 volt dc power supply.
When you remove a 750-watt -48 V to -60 V dc power supply, observe the following precautions.
Statement 8
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are
present inside any component that has this label
attached. There are no serviceable parts inside these
components. If you suspect a problem with one of these
parts, contact a service technician.
.
Chapter 6 Removing and replacing components
295