Lenovo System x3850 X6 Installation And Service Manual page 292

Hide thumbs Also See for System x3850 X6:

Table of Contents

Turn the front operator panel over and disconnect the LCD system information display panel and

the front operator panel cables.

If you are replacing the front operator panel, remove the LCD display panel from the front operator

panel assembly. Grasp tab on the LCD retention latch and pull it to the right to disengage the latch

and remove the LCD display panel.

If you are instructed to return the front operator panel assembly, follow all packaging instructions,

and use any packaging materials for shipping that are supplied to you.

Replacing the front operator panel assembly

Use this information for instructions on how to replace the front operator panel.

To install the front operator panel, complete the following steps.

Record (take a photograph of the barcode label or write down the barcode number) the 11S and

FRU barcode information for the existing and replacement front operator panel assemblies. The

label with this information is on the front operator panel assembly printed circuit board. This

information is required to update the customer records, service offering support information, and

component VPD.

System x3850 X6 and x3950 X6 Installation and Service Guide

Troubleshooting

System x3950 x6 6241