Lenovo System x3850 X6 Installation And Service Manual page 318

Step 2. Align the slots on the sides of the midplane with the alignment pins on the shuttle and lower the
midplane onto the pins until the midplane is seated in place.
Shuttle
Alignment pins
Midplane
assembly
Step 3. Grasp the shuttle with your hand through the hole on the center of the shuttle and grasp the bottom
of the shuttle with your other hand and align it with the shuttle slot; then, slide the shuttle into the
chassis until it is seated firmly.
Step 4. Rotate the shuttle cam handles up until they lock in place on the chassis.
Step 5. Reinstall all of the components in the rear of the server.
Step 6. Slide the components in the front of the server back into the server.
Step 7. Reconnect the power cords and any cables that you removed.
Step 8. Turn on the peripheral devices and the server.
Step 9. Update the midplane part number, FRU part number, serial number, and prefix serial number in the
customer records, service offering support information, and component Vital Product Data (VPD)
using the Advanced Settings Utility (ASU) program. For more information about using ASU and
additional command options, see "Advanced Settings Utility program" on page 140.
304
System x3850 X6 and x3950 X6 Installation and Service Guide
Alignment pins