Lenovo System x3850 X6 Installation And Service Manual page 296

Replacing the LCD system information display panel
Use this information for instructions on how to replace the LCD system information display panel.
To install the LCD system information display panel, complete the following steps.
Step 1. Record (take a photograph of the barcode label or write down the barcode number) the 11S and
FRU barcode information for the existing and replacement LCD system information display panel.
The label with this information is on printed circuit board installed on the back of the LCD system
information display panel. This information is required to update the customer records, service
offering support information, and component VPD.
Step 2. Orient the LCD system information display panel so that the LCD connect is next to the LEDs on
the operator panel.
Step 3. Lower the LCD system information display panel, while aligning the LCD retention latch with the
slots on the front operator panel, push it in until it clicks in place on the operator panel.
Step 4. Reconnect the LCD display panel cable to the LCD display panel.
Step 5. Reinstall the front operator panel
282
System x3850 X6 and x3950 X6 Installation and Service Guide