Lenovo System x3850 X6 Installation And Service Manual page 293

Step 2. Reinstall the LCD system information display panel into the front operator panel.
Step 3. Orient the LCD system information display panel so that the LCD connect is next to the LEDs on
the operator panel.
Step 4. Lower the LCD system information display panel, while aligning the LCD retention latch with the
slots on the front operator panel. Push it in until it clicks in place on the front operator panel.
Step 5. Reconnect the LCD display panel cable to the LCD display panel.
Step 6. Align the front operator panel with the slot on the storage book and slide it in until it is seated in
place.
Step 7. Reconnect the front operator panel cables to the storage book board and the rear air baffle. Make
sure that you reinstall the plug that your removed from the old assembly to the rear of the new air
baffle.
Step 8. Reinstall the storage book (see "Replacing the storage book" on page 274).
Step 9. Reconnect the power cords and any cables that you removed.
Step 10. Turn on the peripheral devices and the server.
.
Chapter 6 Removing and replacing components
279