Lenovo System x3850 X6 Installation And Service Manual page 697

Yes
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0184
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
Related links
– Finding the UEFI (POST) error code
• 806f0013-1701ffff : A diagnostic interrupt has occurred on system
[ComputerSystemElementName].
The user has pressed the NMI button or there has been a malfunction with the button.
May also be shown as 806f00131701ffff or 0x806f00131701ffff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0222
User Response
If the NMI button has not been pressed, complete the following steps:
1. Make sure that the NMI button is not pressed.
2. Replace the system board (Trained service personnel only).
Related links
– Removing the standard I/O book
• 806f001e-2201ffff : No bootable media available for system [ComputerSystemElementName].
No boot device has been detected in the system.
May also be shown as 806f001e2201ffff or 0x806f001e2201ffff
Severity
Info
Serviceable
Appendix C. Integrated management module II (IMM2) error messages
683