Lenovo System x3850 X6 Installation And Service Manual page 300

Hide thumbs Also See for System x3850 X6:

Table of Contents

Locate the microprocessor installation tools that comes with the new microprocessor kit. Use the

empty tool to remove the failed microprocessor.

Note: The microprocessor FRU comes with two microprocessor installation tools: one tool is

empty and one tool comes with a microprocessor and a cover on the bottom of the tool.

Remove the microprocessor from the socket:

Use the empty installation tool and ensure that the handle is in the open position. If the tool

handle is not in the open position, twist the handle on the microprocessor installation tool

counterclockwise so that it is in the open position.

Align the holes on the installation tool with the screws on the microprocessor bracket, then

lower the microprocessor installation tool down over the microprocessor. The installation tool

rests flush on the socket only if it is aligned correctly.

System x3850 X6 and x3950 X6 Installation and Service Guide

Microprocessor

Installation tool

Microprocessor

Troubleshooting

System x3950 x6 6241