Lenovo System x3850 X6 Installation And Service Manual page 39

The following illustration shows the connectors, LEDs, and controls that are accessible on the storage book.
Storage book
Scroll up
button
Scroll down
button
USB 2.0
connector
USB 3.0
connectors
Drive activity
LED (green)
Drive status
LED (yellow)
The following illustration shows the connectors on the storage book board.
• Drive status LEDs: These LEDs are on SAS or SATA hard disk drives and solid state drives. When one of
these LEDs is lit, it indicates that the drive has failed. When this LED is flashing slowly (one flash per
second), it indicates that the drive is being rebuilt. When the LED is flashing rapidly (three flashes per
second), it indicates that the controller is identifying the drive.
• Drive activity LEDs: These green LEDs are on all hot swap drives.
– When this LED is flashing, it indicates that the drive is actively reading or writing data.
– For SAS and SATA drives, this LED is off when the drive is powered but not active.
– For NVMe (PCIe SSD) solid state drives, this LED is on solid when the drive is powered but not active.
Power Locate Check
Select
button\ button\ log LED
button
LED LED
Chapter 1
System
error LED
Reset
button
PCIe slot 11
error LED
PCIe slot 12
error LED
Storage
board
error LED
Video
connector
.
The Lenovo System x3850 X6 and x3950 X6 Type 6241 server
25